The CMI Voluntary Can and End Dimension Reference Manual is a compilation of technical information developed by committees of the Can Manufacturers Institute (CMI). Intended for use by CMI members and other interested industry representatives, this publication is available to the public as a service of the Can Manufacturers Institute. CMI does not provide either an expressed or implied warranty as to their viability or accuracy. The entire Can Standards Manual is not provided here but can be ordered for $30 for CMI members and $50 for non-members. Pre-payment is required.
202 Can and End Specifications
| ENDS |
| Curl Diameter | 2.340 ± .006 |
| Curl Height* | 0.080 ± .005 |
| Curl Opening Diameter | 2.270 Min. |
| Countersink Depth | 0.270 ± .005 |
| Countersink Radius | 0.020 Ref. |
| Countersink Diameter | 1.913 Ref. |
| Chuck Wall Angle | 12° Ref. |
| Panel Height | 0.090 ± .005 |
| End Flange Width | 0.215 Ref. |
*BMC .083 Nominal
| CANS |
| Body Outside Diameter* | 2.602 ± .007 |
| Flange Radius | 0.050 Ref. |
| Flange Width | 0.082 ± .008 |
| Flange Can Height | 4.812 ± .015 |
| Flange Diameter | 2.255 Max. |
| Neck Plug Diameter | 2.063 ± .007 |
| Neck Seaming Clearance | 0.120 Min. |
| Headspace | 0.470 ± .020 |
* ANC 2.600 Nominal
|
